Alumina ceramic lining tile is generally accepted as abrasion resistant tile , sticky resistant ceramic liner due to easy installation, low cost, saving maintenance time, etc. are widely used. But in power plants, metallurgical plant equipment is generally with higher temperature, sticky epoxy resin adhesive does not resist high temperauture (maximum temperature 150 ℃), once the long-term operation at ultra-high temperatures, the adhesive easily become aging and cause ceramic liner fall-off. Welded wear resistant ceramic liner can effectively solve this problem.

Pingxiang chemshun ceramics co.ltd produce weld-on ceramic liner tile with two holes or three holes , popular sizes like : 150*100*6/13/25/50mm 100*100*13/25/50mm.customized sizes are available.

 Welded alumina ceramic lining tile is pasted in the inner of pipe wall with a strong glue, in conjunction with welding ceramic liner through the hole firmly welded to the pipe wall. To protect the joints,then screw the cap on the ceramic. Such a double reinforcement ensure that the ceramic liner does not fall off with character of Ultra-wear-resistant, anti-shedding, high temperature and so on. welded wear resistant ceramic liner has now been extended to the development of electric power, metallurgy, mining, cement and other industries and has been widely used and recognized.

After chemshun ceramics several installation practice, welded alumina ceramic lining tile really can solve the problem of high temperature 500 degrees, completely solve the high temperature fall-off phenomenon,and ensure safety in production enterprises to create greater benefits for the enterprise contributed

Welcome to inquiry chemshun ceramics via office@chemshun.com