Chemshun Ceramics- Wear Resistant Ceramic Identification

The wear resistant ceramic on all the machinery equipment wear a lot, such as coal, iron and steel, smelting, machinery, coal, mining, chemical industry, cement, port and wharf etc

Pingxiang chemshun ceramics Co., Ltd wear-resistant ceramic liner features:

1. Great hardness: its rockwell hardness is hra80-90, second only to diamond, and far exceeds the wear resistance of wear-resistant steel and stainless steel.

2. Excellent wear resistance: its wear resistance is equivalent to 266 times of manganese steel and 171.5 times of high-chromium cast iron.
According to our customer tracking survey over ten years, under the same working condition, the service life of the equipment can be extended at least 10 times.

3. Light weight: its density is 3.6g/cm3, only half of that of steel, which can greatly reduce the equipment load.

4. Strong adhesion and good heat resistance: the wear-resistant ceramic lining is glued on the inner wall of the equipment with heat-resistant and strong adhesive.
Aging can run for a long time not under 350 ℃.

Pingxiang chemshun ceramics Co., Ltd identification of wear resistant ceramic linings

1. The promising wear-resistant ceramic lining has a flat surface, no black spots, smooth but not rough, uniform color and luster. Except for vulcanization, the wear-resistant ceramic lining will be attached to a piece of background paper for the convenience of construction, and the joint will be continuous into a straight line

2. The measured density and the content of alumina can be calculated by the measured density

3. Do the abrasion test. Use the sandblasting machine to test the abrasion within 60 minutes with the pressure of 4.0kg/cm3, distance of 50mm, spray Angle of 45 degrees