The construction method of wear-resistant ceramic lining is generally to stick it on the equipment with ceramic glue. Another method is to double fix it by welding the orifice plate. This construction method is more suitable for operation under high temperature conditions to ensure that the ceramic is not easy to fall off.

Before installation, the surface of the equipment needs to be cleaned, rusted, dust and burrs removed, and the surface must be kept clean before pasting the ceramic lining. Ceramic glue is divided into AB components. Mix them evenly according to regulations. Mix as much as you need to avoid mixing too much and causing it to lose viscosity after solidification. When applying glue to the alumina ceramic orifice plate, be careful not to apply it all around the hole to avoid blocking the hole. After sticking to the construction surface, the position of the hole is used to weld the iron sheet. In order to protect the welding point, the small ceramic cover is coated with glue and glued to the iron sheet. Welding the iron sheet can play a secondary fixing role, making the ceramic lining more impact-resistant and the ceramic not easy to fall off. It is suitable for working conditions with large material scouring force. more information in website : www.chemshun.com  office@chemshun.com