The cyclone device separates the medium in the mixture by high-speed rotation, and the inner surface is scraped by the medium particles for a long time, and the apparatus is easily damaged. Manufacturers will often choose to use wear resistant ceramic lining to increase the wear resistance of the inner wall and extend equipment life. Chemshun Ceramics have much experienced to produce alumina ceramic linings, often help customers to solve alumina ceramic lined cyclon problems with standard or engineered ceramic tile liner 

In the design of cyclone ceramic lining, the customer often require large-size wear resistant ceramic lining with 200mm, 300mm, 500mm  because they want to install conveniently ,and ceramic manufacturers or suppliers can not provide this large size ceramic tile liner 

Why manufacturers do not want to make this large-size wear resistant ceramic lining ? Now we analyze the reasons for it: 

cyclone is a kind of separation equipment with solid-liquid two-phase mixture under the action of the centrifugal force and gravity,which requires smooth internal surface of the device, the gap between wear resistant ceramic lining is small, does not allow Ceramic pieces to be warped and deformed. So if the length of the ceramic block is too large, the production will lead to the formation of ceramic pieces of deformation; if the width is too large, due to both sides of the corners become larger in the press molding, which will lead to hardly demould when pressing production ,surely the product of dense performance is not good, greatly reduce product quality and yield. It can be seen that customer cann't prefer convenience when choosing the cyclone lined ceramic plate , but also needs to design the cyclone-lined solution according to the size and working condition of the equipment.

Pingxiang Chemshun Ceramics co.ltd produce kinds of wear resistant ceramic lining products with Al2O3 92% and 95% , welcome to visit our website : www.chemshun.com for more information .