Chemshun Ceramic Tile Installation 

                                     -----By Epoxy Resin Glue 

1: Preparation Before Installation 

1) Access to work site  

  --Make sure that there is good and safe working facilities on the work site

  --Use scaffolding,temporary platforms to ensure comfortable working position

2) Tools:

  --Standard epoxy resin glun gun if glue water by branch bottle

  --Several shovels

  --Damond cutting discs for wet cutting

  --Ceramic cutting table saw with water cooling

2: Preparation of surface

1) Inspection 

  --Make certain that the equipment substrate is in a good condition

  --Make sure that poor quality steel parts have been repaired or replaced

2) Cleaning 

  --Clean the rust, grease sticked on the equipment surface by polishing or blasting, then finally wash it with detergent

3: Installation on the equipment

1) Glue preparation : First preheat the package glue in the 45 degree,according to the glue A & glue B usage proportion, mix and Stir evenly   2) Apply Glue: doub the glue in the equipment surface, and then close ceramics tiles on the glue water,finally tap it again with a rubber hammer from middle to all around and let the air run away .

3) Glue solidification: different solification hours for different glue water in different outdoor or room temperature.

Remarks: keep the Epoxy resin bottle closed if some glue left in order to avoid glue water polluted. 

Pingxiang chemshun ceramics co.ltd welcome your wear resistant ceramic liner installation consult. except for normal abrasive materials (ceramic plain tile , weldable tile liner, dove-tailor ceramics, ceramic pipe liner, alumina ceramic balls, mill brick liner ),we also can 

produce tailor-made engineered ceramics for you.which will offer perfect wear solution for your material handling equipment. more products in

www.chemshun.com office@chemshun.com Tel:+86-799-6790781